Procedures are the same for all rail products

HOW TO CUT RAIL

Just – buckle it up!

For More Details,

Tips & Techniques

on Building Fences,

Please visit our website:

www.horserail.com

JWI8765_HTCR_1115

The goal is to obtain a clean, square cut!

Using a square or the side of a Buckle, score

a line across the full width of the rail.

Using bolt cutters, snip one outer wire at the

end of the score line.

Then snip the other outer wire at the other

end of the score line.

Tear the rail from both ends toward the

center wire.

Note 1

: If the rail has only 2 wires - you will

be able to tear the entire width of the rail.

Note 2

: If the rail has 4 wires - you will need

to cut all 4 wires with bolt cutters.

Bend the rail in half, then straighten the rail,

then bend the rail the other direction.

Continue until rail snaps in two.

OPTION

: Score and cut with handheld grinder.

Horserail

Products

• Horserail

, Hottop

Hottop Plus

- Colors: White, Black and Brown

- Sizes: 4˝, 5˝ and 6˝ (108mm,

133mm and 159mm)

- From 2 wire up to 4 wire

configurations

Other Tools Needed

• Square or Horserail

Buckle

• Utility Knife

• Bolt Cutters or Grinder

SAFETY FIRST: USE SAFETY EYE GLASSES AND GLOVES.

TIP:

To find the proper length when attaching a rail to an end post:

- First place a Buckle on top of the rail.

- Pull the rail (hand tight).

- Hold the two items up to the post marking where the desired

length would be.

- Mark the rail and follow the steps on how to cut it.

Horserail

, Hottop

and HottopPlus

are registered trademarks of John Wall, Inc. 2015